Salsbury-industries 8500 Series Security Cage Storage Lockers User Manual download pdf

Security Cage Storage Lockers – 8400 & 8500 Series

Installation Instructions

Thank you for selecting Salsbury’s 8400 (standard size) or 8500 (large size) security cage storage lockers. We are confident that the quality and

construction of the lockers will prove to be a good investment. These instructions are intended to assist you in assembling the lockers. The lockers

should then be installed and anchored to the floor, wall, or to both. Individual job conditions will dictate the type of anchor fasteners.

STANDARD SIZE (5 compartments)

#8400 - 18"W x 72"H x 18"D, 140 lbs.

Preliminary Note

Please read the complete assembly instructions before attempting to

assemble the lockers. Check the materials to be sure that they are

correct for the job and that there is no damage.

Use ¼” – 20 X ¾” long screws all around with screw heads on the

outside Lockers should be assembled individually as indicated in the

order of the drawings.

The essential tools required for assembling the lockers are a phillips

head screw driver and a pair of pliers. The lockers should be

assembled on a flat level surface and installed in position, anchoring

to the floor or wall, as required.

Assembly Overview

Fasten the compartment shelves to the pair of sides (right/left) using

shelf supports that bolt to the shelf on the outside of the wire mesh

with three screws, large washers, and nuts that go through the wire

mesh. Place the back against the two sides and screw through the

back and the upright posts on the inside of the cage locker.

Bolt the top on. The bottom is identical and should have the flanges

down. Place and secure the door to the hinges and bolt in place.

Level the cage lockers and mount to the floor, or wall, as required.

LARGE SIZE (4 compartments)

#8500 - 30"W x 80"H x 30"D, 230 lbs.

SALSBURY INDUSTRIES

1010 East 62

Street, Los Angeles, CA 90001-1598

Phone: 1-800-562-5377 Int’l Phone: 323-846-6700

Fax: 1-800-562-5399 Int’l Fax: 323-846-6800

www.lockers.com engineering

@lockers.com

Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.

1 2

Installation Instructions 1

Summary of Contents

Page 1 - Installation Instructions

Security Cage Storage Lockers – 8400 & 8500 Series Installation Instructions Thank you for selecting Salsbury’s 8400 (standard si

Page 2

Security Cage Storage Lockers – 8400 & 8500 Series Installation Instructions FOR BOTH #8400 & #8500: NOTE: Only 3 compartme

Comments to this Manuals

No comments

Salsbury-industries 8500 Series Security Cage Storage Lockers User Manual

Browse online or download User Manual for Furniture Salsbury-industries 8500 Series Security Cage Storage Lockers. Salsbury Industries 8500 Series Security Cage Storage Lockers User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Furniture Salsbury-industries 8500 Series Security Cage Storage Lockers